Circular saw blades tend to have a 5/8-inch arbor and a diameter from 5 3/8 to 10 inches. It depends on your materials and your cutting needs to choose a suitable blade.
Here are my top picks for the best circular saw blade for hardwood:
Here are the best circular saw blades for hardwood you can buy in 2024:
- Multi-Purpose (10-Inch 50-Tooth Saw Blade): Freud D1050X Diablo
- For Cross-Cutting (8 1/4-Inch 60-Tooth Saw Blade): TWIN-TOWN Saw Blade
- For Fine Ripping (7 1/4-Inch 40-Tooth Saw Blade): COMOWARE Circular Saw Blade
- For Ripping Oak (6 1/2-Inch 24-Tooth Saw Blade): BOSCH DCB624 Daredevil Saw Blade
- Durable (10-Inch 40-Tooth Saw Blade): Overpeak Circular Saw Blade
- For Small Pieces (5 3/8-Inch 30-Tooth Saw Blade): Whirlwind USA MGSB Circular Saw
| 6 Best Circular Saw Blades For Hardwood | ||
|---|---|---|
Multi-Purpose | Freud D1050X Diablo
| |
For Cross-Cutting | TWIN-TOWN Saw Blade
| |
For Fine Ripping | COMOWARE Circular Saw Blade
| |
For Ripping Oak | BOSCH DCB624 Daredevil Saw Blade
| |
Durable | Overpeak Circular Saw Blade
| |
For Small Pieces | Whirlwind USA MGSB Circular Saw
| |
10-Inch 50-Tooth Saw Blade
Multi-Purpose (10-Inch 50-Tooth Saw Blade): Freud D1050X Diablo
- Ripping & Crosscutting with a smooth finish
- Laser-cut stabilizer vents
- Laser-cut heat expansion slots
- Large gullets for chip-removal space
- Thin kerf, Nonstick coating, Tri-metal brazing, Anti-kickback teeth
- Nothing to complain
Freud D1050X Diablo is a multi-purpose circular saw blade. I recommend this blade for both ripping and cross-cutting. The blade handles from plywood to hardwood pretty well, leaving a smooth finish with its 50 teeth and an RPM of up to 7,000.
The teeth of Freud D1050X Diablo is pretty special. First, each tooth has a carbide tip, but not a regular carbide tip like other blades. The tips are made of Tri-metal brazing blend, which has a layer of copper sandwiched between layers of silver. Second, the teeth are divided into groups of 5 and separated by large gullets. The large gullets provide space for chips to fall out, and the close grouping of teeth makes it easier for crosscutting. And the last, each tooth group has a raised shoulder to prevent kickbacks when making rip cuts.
The plate of Freud D1050X Diablo is made of sturdy steel, which has a thin kerf for fast cutting, easy feeding, and less waste. Moreover, it has laser-cut stabilizer vents to reduce vibration and noise, laser-cut heat expansion slots to dissipate heat, and non-stick coating to avoid blade drag, corrosion, and pitch build-up.
| Freud D1050X Diablo Specifications | |
|---|---|
Material | Steel plate & Carbide tips |
Number of Teeth | 50 |
Arbor Size | 5/8 inch |
Highlight Features | Stabilizer vents; Heat-expansion slots; Large gullets; Thin kerf; Nonstick coating; Tri-metal brazing; Anti-kickback teeth. |
Freud D1050X Diablo is a multi-purpose circular saw blade, nothing to complain.
8 1/4-Inch 60-Tooth Saw Blade
For Cross-Cutting (8 1/4-Inch 60-Tooth Saw Blade): TWIN-TOWN Saw Blade
- More ATB teeth for a smoother finish
- C4 construction grade
- Elegant and simple design
- Thin kerf design for fast & smooth cuts
- Laser-cut stabilizer vents
- Not for thick stock
TWIN-TOWN Saw Blade features ATB (Alternate Top Bevel) teeth, which are specialized for cross-cutting, cut-off, and trimming. A tooth count of 60 ensures a smoother finish. This is a saw blade designed for cross-cutting, however, still decent for ripping.
TWIN-TOWN Saw Blade features Tungsten carbide teeth that meet C4 construction-grade - 3X longer life. The blade has a thin kerf of 2.0mm (less than 0.1 inch) for smooth and fast cuts, as well as less waste. The laser-cut stabilizer vents provide non-vibrating and silent performance.
Besides, TWIN-TOWN Saw Blade looks pretty elegant and simple with a whole silver-color finish. However, don’t use this blade for thick stocks of hardwood such as oak, it’s not effective, moreover, it may cause the wood dust to burn.
| TWIN-TOWN Saw Blade Specifications | |
|---|---|
Material | Steel plate & Carbide tips |
Number of Teeth | 60 |
Arbor Size | 5/8 inch |
Highlight Features | C4 construction grade; ATB teeth; Thin kerf; Laser-cut stabilizer vents |
TWIN-TOWN Saw Blade provides cross-cutting, cut-off, and trimming with a smooth finish.
7 1/4-Inch 40-Tooth Saw Blade
For Fine Ripping (7 1/4-Inch 40-Tooth Saw Blade): COMOWARE Circular Saw Blade
- Large tooth for easier sharpening
- Larger gullets for chip removal
- Non-kickback, Heat dissipation, & Anti-vibration
- Positive hook angles
- Affordable
- Nothing to complain
COMOWARE Circular Saw Blade is pretty affordable yet its performance is really impressive. This blade is unbeatable at its price. It features 40 teeth with premium carbide tips at its price. The teeth are larger so that you can sharpen them more times. The gaps between the teeth are quite large for easier chip removal and more effective heat dissipation. Besides, each tooth has a raised shoulder, so lowering the risk of kickbacks.
Although the teeth are ATB teeth for cross-cutting, with a positive hook angle design that gives more pull on the material, the blade is perfectly okay for ripping. Moreover, this tooth design and a higher tooth count deliver rip cuts with a fine finish.
The body of COMOWARE Circular Saw Blade is made of carbon steel, which is sturdy yet lightweight. It has laser cuts to stabilize the blade while making cuts.
| COMOWARE Circular Saw Blade Specifications | |
|---|---|
Material | Carbon steel plate & Carbide tips |
Number of Teeth | 40 |
Arbor Size | 5/8 inch |
Highlight Features | Larger teeth; Larger gullets; Non-kickback; Heat dissipation; Anti-vibration; Positive hook angles |
COMOWARE Circular Saw Blade delivers rip cuts with a fine finish - unbeatable at its price.
6 1/2-Inch 24-Tooth Saw Blade
For Ripping Oak (6 1/2-Inch 24-Tooth Saw Blade): BOSCH DCB624 Daredevil Saw Blade
- Smaller in size & Fewer in tooth count
- Upgraded C3/C4 micro-grain formulation
- Anti-friction coating
- Thin kerf for faster cuts and less waste
- Extra-hard steel plate
- Not for large sheets
Although the COMOWARE Circular Saw Blade above is the best bang for your buck when it comes to ripping, it cannot handle thick oak stocks well. In this case, you should consider this BOSCH DCB624 Daredevil Saw Blade.
This blade is smaller in size - only 6 1/2 inches in diameter. This smaller size helps the blade spin faster and go through the wood faster. The tooth count is fewer - only 24 teeth, also helps the blade go through the wood faster. These together make the blade ideal for ripping hardwoods like oak.
The carbide tips are made of upgraded C3/C4 micro-grain, which is super effective for cutting and highly impact-resistant. The body of BOSCH DCB624 Daredevil Saw Blade also has an anti-friction coating, a thinner kerf, and laser cuts.
| BOSCH DCB624 Daredevil Saw Blade Specifications | |
|---|---|
Material | Steel plate & Carbide tips |
Number of Teeth | 24 |
Arbor Size | 5/8 inch |
Highlight Features | Upgraded C3/C4 micro-grain; Anti-friction coating; Thin kerf; Extra-hard steel plate |
BOSCH DCB624 Daredevil Saw Blade cuts oak stocks like a hot knife through butter.
10-Inch 40-Tooth Saw Blade
Durable (10-Inch 40-Tooth Saw Blade): Overpeak Circular Saw Blade
- Super durable teeth
- Alternate-Top Bevel Teeth
- Laser-cut expansion slots & stabilizer vents
- Thin kerf for fast and smooth cutting
- Won't chip in softwoods
- Not so smooth
Overpeak Circular Saw Blade is a 10-inch blade with 40 ABT teeth, which is more suitable for cross-cutting. The carbide tip on each tooth is made with super-tough materials that last five times longer than other blades. This blade is super durable.
Like other blades, Overpeak Circular Saw Blade also has slots and vents on its plate to dissipate the heat and absorb the vibration and noise. The kerf is thin enough for fast and smooth feeding action. This blade is perfect for softwoods; it also works quite well on hardwoods but the cuts won’t be so smooth.
| Overpeak Circular Saw Blade Specifications | |
|---|---|
Material | Steel plate & Carbide tips |
Number of Teeth | 40 |
Arbor Size | 5/8 inch |
Highlight Features | Laser-cut expansion slots & stabilizer vents; Thin kerf |
Overpeak Circular Saw Blade is perfect on softwoods and decent on hardwoods.
5 3/8-Inch 30-Tooth Saw Blade
For Small Pieces (5 3/8-Inch 30-Tooth Saw Blade): Whirlwind USA MGSB Circular Saw
- Small blade for small pieces
- Up to 3 1/2-inch hardwoods
- For hardwood, softwood, exotic wood, & abrasive wood
- Lower hood angle for a smoother finish
- 5/8-inch or 7/8-inch arbor
- Wears off sooner than expected
This Whirlwind USA MGSB blade is pretty small, which is ideal for cutting small pieces. Besides, with this size and with a metal ring to change the arbor from 7/8 inch to 5/8 inch, this blade suits most saws, from hand saws, circular saws to table saws.
The quality and performance of the blade are impressive. It cuts through hardwoods up to 3 1/2-inch thick easily and smoothly. The lower hood angle creates a smoother cut finish, also increase the feed pressure.
Whirlwind USA MGSB blade works well on hardwood, softwood, exotic wood, and abrasive wood. However, it wears off sooner than my expectation.
| Whirlwind USA MGSB Circular Saw Specifications | |
|---|---|
Material | Steel plate & Carbide tips |
Number of Teeth | 30 |
Arbor Size | 7/8-5/8 inch |
Highlight Features | Lower hood angle; Anti-vibration vents; A metal ring to change the arbor size |
Whirlwind USA MGSB blade is ideal for cutting small pieces, from softwoods to hardwoods.
How To Choose The Best Circular Saw Blade For Hardwood?
The first thing to pay attention to is whether the blade fits your saw - the blade size and the arbor size. Then, identify your needs. If you want a rip blade, choose a blade with FT teeth and a fewer tooth count. If you want a cross-cut blade, choose a blade with ABT teeth and a higher tooth count.
Other features that are desired when choosing a circular saw blade are Stabilizer vents, Heat-expansion slots, Large gullets, Thin kerf, Nonstick coating Anti-kickback tooth shoulder.
Which Brands Make The Best Circular Saw Blade For Hardwood?
Freud Tools
Freud Tools is a well-known provider of industrial cutting solutions. Their portfolio varies from blades for table saws, circular saws, hand saws to drilling bits, cutter heads, and jointer knives. Their circular saw blades have a significant advantage of well-designed, well-made details for maximized performance. Moreover, Freud Tools has a wide network of “Authorized Sharpening Service Centers” across American. This is the most popular brand when it comes to high-quality saw blades.
BOSCH
Bosch is a German multinational engineering and technology company. Power tools and accessories are one of their main product lines. Bosch’s circular saw blades are always well-known for their durability and performance. When it comes to Bosch, you are assured of quality products with great after-sales services.
Twin-town Enterprises
Twin-town is a Chinese manufacturer of circular blades. Besides saw blades, they also produce drilling bits, sanding sheets, flap discs, etc. Their main advantages are the decent quality and an affordable price. If you are looking for budget blades for a short-term project, Twin-town is a considerable brand.
FAQs
Is more teeth on a circular saw blade better?
A blade with more teeth delivers cuts with a smoother cutting surface. Moreover, it also means that you’ll have more teeth to wear off before needing a new blade. In contrast, a blade with fewer teeth delivers faster and easier cuts.
What is the most common circular saw blade size?
It varies from 5 3/8 inches to 10 inches. The most common size would be 7 1/4 inches.
How long does a saw blade last?
It depends entirely on your materials and how much you cut. So it is hard to answer this question. All I can say is when you feel more resistance when making a cut, you should clean the blade. After two or three times cleaning the blade, you should sharpen or replace it.
Why does my circular saw blade burn the wood?
The cutting process causes a lot of friction between the blade and the wood. If the blade is dull or you push the stock too slowly, the friction may cause burns.
How do I know if my circular saw blade is dull?
When you notice more tear-out, chipping, and burn marks or feel more resistance when cutting.
Conclusion
To sum up, Freud D1050X Diablo is my recommendation for circular saws as it is versatile, well-designed, and well-made. For other cutting needs and materials, you can consult my review of other blades above.
Eugene WilliamsHi, my name is Eugene, the ultimate home enthusiast! I write buying guides and ideas on how to create a warm and welcoming home. Join me on my journey to make everyday in your house a staycation in the comfort of your own space!
